The directional bearing is a very important motorcycle accessory that affects vehicle handling. When people have their cars maintained, most of them only know to change the engine oil, oil filter and coolant. Very few people know that they need to change the shock absorber fluid and brake fluid. However, very few people perform maintenance on the steering bearings of vehicles.

So how to maintain directional bearings? Here are 10 correct maintenance steps for everyone.

The first step

Remove the front axle. Of course, the front wheels should also be removed.

Step Two

Loosen the shock-absorbing fixing screws because we are going to remove the front shock absorber.

Step Three

Remove the front brake calipers and place them in a safe location.

Step Four

Remove the front shock absorber.

Step Five

Remove the screws of the riser.

Step 6

Remove the triangular connecting plate.

Step 7

Clean the upper and lower bearings on the triangular plate. Note that if the sealing cover part is made of rubber, it cannot be cleaned with gasoline. If it is a metal sealing cover, it doesn't matter.

Step 8

Spread butter.

Step 9

Reinstall the triangular panel.

Step Ten

Reinstall the front axle wheels.

(The text is from the Internet. If there is any infringement, please contact us for deletion）