market dynamics
What do you know about the three components that determine the quality of a motorcycle?
Release date:2023.12.14

Motorcycle development for so many years, the domestic is also from scratch, especially now the motorcycle market is basically domestic cars, and the rider to see the car is mainly looking at the quality, the quality of the good or bad can also distinguish the good or bad of this motorcycle, due to the wide variety of motorcycles now, all kinds of have, but only the quality of the motorcycle will be deeply loved by motorcycle friends.

However, from the current majority of motorcycles, if compared from the appearance, there is basically no much change, but from the details to analyze, the internal structure and parts are also the standard that determines the quality of motorcycles.

How to choose a reliable motorcycle?

Analysis of its quality is good or bad, in fact, also from the internal work of motorcycles, materials to analyze, just like many years ago, most of the domestic motorcycles are imported cars, including imported parts used in domestic assembly, but the overall level of technology and material standards to determine the quality of motorcycles.

Parts: There are many components of motorcycles, including its lines, chains, drives, cushions, plastic parts, electronic control chips, tires, frames, light bulbs, batteries and so on.

The most important three core parts: the manufacturing of motorcycles is not easy, in the manufacture of a tall motorcycle requires thousands of parts, especially the core components, can not be sloppy. The three core components representing the motorcycle are mainly the engine, the frame, and the shock absorption.

However, from the perspective of most users, the engine of the three core parts is the most important component that really determines the quality of the motorcycle. So the engine is done, basically the service life of the whole vehicle also follows up, in this regard, the core engine also needs three parts to support.


1. Bearing, for the operation of the engine, in addition to the combustion of the fuel injected by the electrically controlled spark plug and the cylinder compression, the operation of high load is mainly through the internal bearing to drive the operation of the components at the same time (crankshaft, connecting rod, gear) are the need for bearings to run, it can be described as a crucial part.

2, piston ring, the operation of the engine is inseparable from this small part, from the piston ring this small part of the working principle is to form a small part with the inner wall of the engine cylinder to block the air and the gap, because the engine is running, the piston ring in the cylinder with the piston high rotation operation, the requirements are relatively high, in addition to the use of oil is also more attention, It can be seen that the quality of the piston ring also determines the quality of the engine.

3. Electric Injection system

(carburetor), want to let the gasoline reach the cylinder, it is necessary to spray the components of the device, and the carburetor (electric injection system) the main work is responsible for fuel delivery, and now most of the motorcycles are using the electric injection system, so the fuel injection concentration has also been optimized, which can bring more efficient operation quality to the car. Fuel consumption can also be further optimized.

After comparing the above three important parts of the motorcycle, if the original factory is damaged in the process of use, the direct replacement of good quality can also make the car get better running quality and longer service life, of course, the important parts of the good motorcycle are generally more reliable, only in this way can the car have a longer service life.

(Graphic from the network, infringement please contact delete)